Difference between revisions of "Formula Specification in Templates"

From wiki.fine.cz
Jump to navigation Jump to search
 
(9 intermediate revisions by the same user not shown)
Line 37: Line 37:
''IF(220>200;220-200;200-220) ⇒ 20''
''IF(220>200;220-200;200-220) ⇒ 20''


''IF(120>MAX('''[X⇕]''');120;-1) ⇒ 120''
''IF(120>MAX('''{X⇕}''');120;-1) ⇒ 120''


''IF(MAX('''[X⇓2:⇓3]''')>'''[X⇓7]''';MAX('''[X⇓2:⇓3]''');'''[X⇓7]''')) ⇒ 6''
''IF(MAX('''{X⇓2:⇓3}''')>'''{X⇓7}''';MAX('''{X⇓2:⇓3}''');'''{X⇓7}''')) ⇒ 6''


''IF(MAX('''⟨1;2⟩''')>'''6''';MAX('''⟨1;2⟩''');'''6''') ⇒ 6''
''IF(MAX('''1;2''')>'''6''';MAX('''1;2''');'''6''') ⇒ 6''


Result is text:
Result is text:


''Input'' '''''[Coordinate Z]''''' ''= 210''';[GWT]''' = 180''
''Input'' '''''{Coordinate Z}''''' ''= 210''';{GWT}''' = 180''


''IF('''[Coordinate Z]'''>0;"Above terrain";"Under terrain") ⇒ "Top above terrain"''
''IF('''{Coordinate Z}'''>0;"Above terrain";"Under terrain") ⇒ "Top above terrain"''


''IF('''[GWT]'''<'''[Coordinate Z]''';"GWT under top of the test.";"Measure error.") ⇒ "GWT under top of the test."''
''IF('''{GWT}'''<'''{Coordinate Z}''';"GWT under top of the test.";"Measure error.") ⇒ "GWT under top of the test."''
|-
|-
|IFS
|IFS
|''IFS(Test1;Then1;Test2;Then2; ... ;Else)''
|''IFS(Test1;Then1;Test2;Then2; ... ;Else)''
|Checks whether one or more conditions are met and returns a value that corresponds to the first TRUE condition
|Checks whether one or more conditions are met and returns a value that corresponds to the first TRUE condition
|''Input'' '''''[GWT]''''' ''= 15''
|''Input'' '''''{GWT}''''' ''= 15''
''IFS('''[GWT]'''>8;10;'''[GWT]'''>6;9;'''[GWT]'''>3;8;-1) ⇒ 10''
''IFS('''{GWT}'''>8;10;'''{GWT}'''>6;9;'''{GWT}'''>3;8;-1) ⇒ 10''
|-
|-
|NOT
|NOT
Line 121: Line 121:
''CEILING(-10.4;5;1) ⇒ -15''
''CEILING(-10.4;5;1) ⇒ -15''


CEILING(-10.4;2;0) ''⇒'' -10
''CEILING(-10.4;2;0) ⇒ -10''


CEILING(-10.4;2;1) ''⇒'' -12
''CEILING(-10.4;2;1) ⇒ -12''
|-
|-
|COS
|COS
Line 219: Line 219:
|Returns the sum of a series of numbers
|Returns the sum of a series of numbers
|''Inputs linked to data '''X[0;1;2;3;4;5;6]'''):''
|''Inputs linked to data '''X[0;1;2;3;4;5;6]'''):''
''SUM('''[X⇓2:⇓5]''') ... SUM('''⟨1; 2; 3; 4⟩''') ⇒ 10''
''SUM('''{X⇓2:⇓5}''') ... SUM('''1; 2; 3; 4''') ⇒ 10''


''SUM('''[X⇕]''') ⇒ 21''
''SUM('''{X⇕}''') ⇒ 21''
|-
|-
|SUMIF
|SUMIF
|
|
|Returns the sum of all the values that meet a given criteria
|Returns the sum of all the values that meet a given criteria
|
|''SUMIF('''{X_Coor⇕}''';">2";'''{Y_Coor⇕}''')''
|-
|-
|SUMIFS
|SUMIFS
Line 298: Line 298:
''CONCAT(12;"34";56) ⇒ 123456.000''
''CONCAT(12;"34";56) ⇒ 123456.000''


''Input '''[GWT<sub>b</sub>]''' = 15''
''Input '''{GWT<sub>b</sub>}''' = 15''


''CONCAT(['''GWT<sub>b</sub>'''];" m") ⇒ "15 m"''
''CONCAT('''{GWT<sub>b</sub>}''';" m") ⇒ "15 m"''
|-
|-
|LEFT
|LEFT
Line 307: Line 307:
|''LEFT("qwert";3) ⇒ "qwe"''
|''LEFT("qwert";3) ⇒ "qwe"''
''LEFT("qwert";1) ⇒ "q"''
''LEFT("qwert";1) ⇒ "q"''
|-
|LEN
|''LEN(Text)''
|Returns the number of characters in a text string
|''LEN("qwert") ⇒ 5''
''LEN("") ⇒ 0''
|-
|-
|RIGHT
|RIGHT
Line 313: Line 319:
|''RIGHT("qwert";3) ⇒ "ert"''
|''RIGHT("qwert";3) ⇒ "ert"''
''RIGHT("qwert";1) ⇒ "t"''
''RIGHT("qwert";1) ⇒ "t"''
|-
|LEN
|''LEN(Text)''
|Returns the number of characters in a text string
|''LEN("qwert") ⇒ 5''
''LEN("") ⇒ 0''
|-
|-
|SEARCH
|SEARCH
Line 324: Line 324:
|Finds one text value within another (not case-sensitive)
|Finds one text value within another (not case-sensitive)
|''SEARCH("G";"Hello GEO!";1) ⇒ 7''
|''SEARCH("G";"Hello GEO!";1) ⇒ 7''
|-
|TEXT
|
|Converts number to text
|
|}
|}
=== Statistical ===
=== Statistical ===
Line 337: Line 342:
|''AVERAGE(3;5;1) ⇒ 3''
|''AVERAGE(3;5;1) ⇒ 3''
''Inputs linked to data '''X[0;1;2;3;4;5;6]'''):''
''Inputs linked to data '''X[0;1;2;3;4;5;6]'''):''
''AVERAGE('''[X⇓3:⇓5]''') ... AVERAGE('''⟨2; 3; 4⟩''') ⇒ 3''
''AVERAGE('''{X⇓3:⇓5}''') ... AVERAGE('''2; 3; 4''') ⇒ 3''
|-
|-
|AVERAGEIF
|AVERAGEIF
Line 355: Line 360:
''Inputs linked to data '''X[0;1;2;3;4;5;6]'''):''
''Inputs linked to data '''X[0;1;2;3;4;5;6]'''):''


''MAX('''[X⇓3:⇓5]''') ... AVERAGE('''⟨2; 3; 4⟩''') ⇒ 3''
''MAX('''{X⇓3:⇓5}''') ... AVERAGE('''2; 3; 4''') ⇒ 3''
|-
|-
|MIN
|MIN
Line 363: Line 368:
''Inputs linked to data '''X[0;1;2;3;4;5;6]'''):''
''Inputs linked to data '''X[0;1;2;3;4;5;6]'''):''


''MIN('''[X⇓3:⇓5]''') ... AVERAGE('''⟨2; 3; 4⟩''') ⇒ 2''
''MIN('''{X⇓3:⇓5}''') ... AVERAGE('''2; 3; 4''') ⇒ 2''
|-
|-
|PERCENTIL
|PERCENTIL
Line 369: Line 374:
|Returns the k-th percentile of values in a range
|Returns the k-th percentile of values in a range
|''Inputs linked to data '''X[1;2;3;4;5]'''):''
|''Inputs linked to data '''X[1;2;3;4;5]'''):''
''PERCENTILE(['''X⇕'''];0.5) ⇒ 3''
''PERCENTILE('''{X⇕}''';0.5) ⇒ 3''
|-
|-
|PERCENTILE.EXC
|PERCENTILE.EXC
Line 375: Line 380:
|Returns the k-th percentile of values in a range, where k is in the range 0..1, exclusive
|Returns the k-th percentile of values in a range, where k is in the range 0..1, exclusive
|''Inputs linked to data '''X[1;2;3;4;5]'''):''
|''Inputs linked to data '''X[1;2;3;4;5]'''):''
''PERCENTILE.INC(['''X⇕'''];1) ⇒ NAN''
''PERCENTILE.INC('''{X⇕}''';1) ⇒ NAN''


''PERCENTILE.INC(['''X⇕'''];0.4) ⇒ 2.4''
''PERCENTILE.INC('''{X⇕}''';0.4) ⇒ 2.4''
|-
|-
|PERCENTILE.INC
|PERCENTILE.INC
Line 383: Line 388:
|Returns the k-th percentile of values in a range
|Returns the k-th percentile of values in a range
|''Inputs linked to data '''X[1;2;3;4;5]'''):''
|''Inputs linked to data '''X[1;2;3;4;5]'''):''
''PERCENTILE.INC(['''X⇕'''];1) ⇒ 5''
''PERCENTILE.INC('''{X⇕}''';1) ⇒ 5''
|-
|-
|STDEV
|STDEV
Line 389: Line 394:
|Estimates standard deviation based on a sample
|Estimates standard deviation based on a sample
|''Inputs linked to data '''X[1;2;3;4;5]'''):''
|''Inputs linked to data '''X[1;2;3;4;5]'''):''
''STDEV(['''X⇕''']) ⇒ 1.581''
''STDEV('''{X⇕}''') ⇒ 1.581''
|-
|-
|STDEV.P
|STDEV.P
Line 395: Line 400:
|Calculates standard deviation based on the entire population
|Calculates standard deviation based on the entire population
|''Inputs linked to data '''X[1;2;3;4;5]'''):''
|''Inputs linked to data '''X[1;2;3;4;5]'''):''
''STDEV.P(['''X⇕''']) ⇒ 1.414''
''STDEV.P('''{X⇕}''') ⇒ 1.414''
|-
|-
|STDEV.S
|STDEV.S
Line 401: Line 406:
|Estimates standard deviation based on a sample
|Estimates standard deviation based on a sample
|''Inputs linked to data '''X[1;2;3;4;5]'''):''
|''Inputs linked to data '''X[1;2;3;4;5]'''):''
''STDEV.S(['''X⇕''']) ⇒ 1.581''
''STDEV.S('''{X⇕}''') ⇒ 1.581''
|-
|-
|TRIMMEAN
|TRIMMEAN
Line 412: Line 417:
|Returns the most common value in a data set
|Returns the most common value in a data set
|''Inputs linked to data '''X[1;2;3;4;5]'''):''
|''Inputs linked to data '''X[1;2;3;4;5]'''):''
''MODE((['''X⇕''']) ⇒ NAN''
''MODE(('''{X⇕}''') ⇒ NAN''


''MODE((['''X⇕'''];3) ⇒ 3''
''MODE(('''{X⇕}''';3) ⇒ 3''
|-
|-
|MEDIAN
|MEDIAN
Line 434: Line 439:
|Uses an index to choose a value from a reference or array
|Uses an index to choose a value from a reference or array
|''Inputs linked to data '''Y[15;16;11;27;22]'''):''
|''Inputs linked to data '''Y[15;16;11;27;22]'''):''
''INDEX('''[Y⇓]''';2) ⇒ 16''
''INDEX('''{Y⇓}''';2) ⇒ 16''


''INDEX('''[Y⇓]''';4) ⇒ 27''
''INDEX('''{Y⇓}''';4) ⇒ 27''


''INDEX('''[Y⇓]''';9) ⇒ NAN''
''INDEX('''{Y⇓}''';9) ⇒ NAN''
|
|
|-
|-
Line 463: Line 468:


|''Inputs linked to data '''Y[15;16;11;27;22]'''):''
|''Inputs linked to data '''Y[15;16;11;27;22]'''):''
MATCH(11;['''Y⇕''']) ''⇒ 3''
''MATCH(11;'''{Y⇕}''') ⇒ 3''


MATCH(27;['''Y⇕''']) ''⇒ 4''
''MATCH(27;'''{Y⇕}''') ⇒ 4''


MATCH(999;['''Y⇕''']) ''⇒ NAN''
''MATCH(999;'''{Y⇕}''') ⇒ NAN''
|
|
|}
|}
Line 487: Line 492:
Column 2: Y - Filtered Y  
Column 2: Y - Filtered Y  
|''Inputs linked to data''
|''Inputs linked to data''
''FILTERTABLE({'''X-value⇕'''};{'''Y-value⇕'''})''
''FILTERTABLE('''{X-value⇕}''';'''{Y-value⇕}''')''


(<s>2.000</s> ... ignored value, '''2.000''' ... saved value)
(<s>2.000</s> ... ignored value, '''2.000''' ... saved value)
Line 572: Line 577:
'''''X[1;2;3;4;5]; Y[15;16;11;27;22]'''''
'''''X[1;2;3;4;5]; Y[15;16;11;27;22]'''''


''LINEARTREND(['''X⇕'''];['''Y⇕'''])''
''LINEARTREND('''{X⇕}''';'''{Y⇕}''')''


''NumRows = 1''
''NumRows = 1''
Line 614: Line 619:
'''''X[1;2;3;4;5]; Y[15;16;11;27;22]'''''
'''''X[1;2;3;4;5]; Y[15;16;11;27;22]'''''


''LINEARTREND(['''X⇕'''];['''Y⇕'''])''
''LINEARTREND('''{X⇕}''';'''{Y⇕}''')''


''NumRows = 2;''
''NumRows = 2;''
Line 655: Line 660:
'''''X[4;8;15]; R[3;5;8]'''''
'''''X[4;8;15]; R[3;5;8]'''''


''LINEARTRENDSC([X⇕];[R⇕])''
''LINEARTRENDSC('''{X⇕}''';'''{R⇕}''')''


''NumRows = 1''
''NumRows = 1''
Line 695: Line 700:
'''''X[4;8;15]; R[3;5;8]'''''
'''''X[4;8;15]; R[3;5;8]'''''


''LINEARTRENDSCANDPOINTS([X⇕];[R⇕])''
''LINEARTRENDSCANDPOINTS('''{X⇕}''';'''{R⇕}''')''


''NumRows = 2''
''NumRows = 2''
Line 840: Line 845:


c - Coefficients c<sub>0</sub> + c<sub>1</sub>*x + c<sub>2</sub>*x<sup>2</sup> + ...
c - Coefficients c<sub>0</sub> + c<sub>1</sub>*x + c<sub>2</sub>*x<sup>2</sup> + ...
| rowspan="2" |''POLYNOMIALTRENDANDPOINTS([X-Input⇕];[Y-Input⇕];2;9)''
| rowspan="2" |''POLYNOMIALTRENDANDPOINTS('''{X-Input⇕}''';'''{Y-Input⇕}''';2;9)''


''Order = 2''
''Order = 2''
Line 955: Line 960:
|''6''
|''6''
|}  
|}  
|''SPLINE([X-Input⇕];[Y-Input⇕];[Num of Points])''
|''SPLINE('''{X-Input⇕}''';'''{Y-Input⇕}''';[Num of Points])''
''Num of Points = 8''
''Num of Points = 8''


Line 1,020: Line 1,025:
|-
|-
|ISNUMBER
|ISNUMBER
|
|''ISNUMBER()''
|Returns TRUE if argument is number
|Returns TRUE if argument is number
|
|ISNUMBER(15) ''⇒ TRUE; ⇒ 1''
ISNUMBER(15e2) ''⇒ TRUE; ⇒ 1''
 
ISNUMBER(1/4) ''⇒ TRUE; ⇒ 1''
 
ISNUMBER(aaa) ''⇒ FALSE; ⇒ 0''
|
|
|-
|-
|ISTEXT
|ISTEXT
|
|''ISTEXT()''
|Returns TRUE if argument is text
|Returns TRUE if argument is text
|
|ISTEXT(123)
ISTEXT("123")
 
ISTEXT(abc)
 
ISTEXT("abc")
|
|
|-
|-
Line 1,163: Line 1,178:
|46,10
|46,10
|}
|}
|}
=== Date and Time ===
{| class="wikitable sortable mw-collapsible"
!Name
!Syntax, parameters
!Description
!''Example''
|-
|DATE
|''DATE(Year;Month;Day)''
|Returns the serial number of a particular date
|''DATE(1899;12;30) ⇒ 0''
''DATE(2024;10;31) ⇒ 45596''
''Inputs linked to data''
'''''{MyYear}'''=2024;'''{MyMonth}'''=10;'''{MyDay}'''=31''
''DATE('''{MyYear}''';'''{MyMonth}''';'''{MyDay}''') ⇒ 45596''
|-
|NOW
|''NOW()''
|Returns the serial number of the current date and time
|''For date and time 20.12.2024 13:48:04 is''
''NOW() ⇒ 45646.5750510648''
''For date and time 01.01.1900 00:00:00 is''
''NOW() ⇒ 1.00''
|-
|TIME
|''TIME(Hour;Minute;Second)''
|Returns the serial number of a particular time
|''TIME(0;0;0) ⇒ 0''
''TIME(18;15;20) ⇒ 0.760648''
''Inputs linked to data''
'''''{MyHour}'''=10[hour];'''{MyMinute}'''=15[min.];'''{MySecond}'''=25[sec.]''
''TIME('''{MyHour}''';'''{MyMinute}''';'''{MySecond}''') ⇒ 0.42737''
|-
|TODAY
|''TODAY()''
|Returns the serial number of the current date
|''For date 20:12:2024''
''TODAY() ⇒ 45646''
''For date 1.1.1900''
''TODAY() ⇒ 1''
|}
|}

Latest revision as of 16:30, 20 December 2024

The list of formula specifications used in Templates. (Notes: bold inputs for functions are linked to the data in program).

Logical

Name Syntax, parameters Description Example
AND AND(Boolean1;Boolean2; ... ) Returns TRUE if all of its arguments are TRUE AND(3=3;2=2) ⇒ TRUE
OR OR(Boolean1;Boolean2; ... ) Returns TRUE if any of its arguments are TRUE OR(3=4;2=3) ⇒ FALSE
TRUE TRUE() Returns the logical value TRUE IF(TRUE();1;2) ⇒ 1
FALSE FALSE() Returns the logical value FALSE IF(FALSE();1;2) ⇒ 2
IF IF(Test;Then;Else) Specifies a logical test to perform

- inputs can be linked to data

- result can be number, text, logical value

Result is number (bold inputs linked to data X[0;1;2;3;4;5;6]):

IF(220>200;220-200;200-220) ⇒ 20

IF(120>MAX({X⇕});120;-1) ⇒ 120

IF(MAX({X⇓2:⇓3})>{X⇓7};MAX({X⇓2:⇓3});{X⇓7})) ⇒ 6

IF(MAX(1;2)>6;MAX(1;2);6) ⇒ 6

Result is text:

Input {Coordinate Z} = 210;{GWT} = 180

IF({Coordinate Z}>0;"Above terrain";"Under terrain") ⇒ "Top above terrain"

IF({GWT}<{Coordinate Z};"GWT under top of the test.";"Measure error.") ⇒ "GWT under top of the test."

IFS IFS(Test1;Then1;Test2;Then2; ... ;Else) Checks whether one or more conditions are met and returns a value that corresponds to the first TRUE condition Input {GWT} = 15

IFS({GWT}>8;10;{GWT}>6;9;{GWT}>3;8;-1) ⇒ 10

NOT NOT(Boolean) Reverses the logic of its argument IF(NOT(5>6);175;155) ⇒ 175

IF(NOT(5>4);175;155) ⇒ 155

IF(NOT("A"="B");175;155)⇒ 175

SWITCH SWITCH(Switch;Case1;Result1;Case2;Result2; ... ;[ Else ]) Evaluates an expression against a list of values and returns the result corresponding to the first matching value. If there is no match, an optional default value may be returned SWITCH(50>6;TRUE();44;FALSE();56;-111) ⇒ 44

SWITCH(30/6;3;120;4;220;5;320;420) ⇒ 320

Mathematical

Name Syntax, parameters Description Example
ABS ABS(Number) Returns the absolute value of a number ABS(120) ⇒ 120; ABS(-120) ⇒ 120
ACOS ACOS(Number) Returns the arccosine of a number ⟨-Pi/2; Pi/2⟩ for Number=0.5 ... DEGREES(ACOS(0.5)) ⇒ 60°
ACOT ACOT(Number) Returns the arccotangent of a number ⟨0; Pi⟩ for Number=1 ... DEGREES(ACOT(1)) ⇒ 45°
ASIN ASIN(Number) Returns the arcsine of a number ⟨-Pi/2; Pi/2⟩ for Number=0.5 ... DEGREES(ASIN(0.5)) ⇒ 30°
ATAN ATAN(Number) Returns the arctangent of a number ⟨-Pi/2; Pi/2⟩ for Number=1 ... DEGREES(ATAN(1)) ⇒ 45°
CEILING CEILING(Number;[Multiple=1];[Mode=0]) Rounds a number to the nearest integer or to the nearest multiple of significance

- if Number<0 and Mode<>0 ⇒ result is rounded up

- if Number<0 and Mode=0 ⇒ result is rounded down

CEILING(10.4) ⇒ 11

CEILING(10.4;1) ⇒ 11

CEILING(10.4;5) ⇒ 15

CEILING(10.8;5) ⇒ 15

CEILING(-10.4;5;0) ⇒ -10

CEILING(-10.4;5;1) ⇒ -15

CEILING(-10.4;2;0) ⇒ -10

CEILING(-10.4;2;1) ⇒ -12

COS COS(Angle[rad]) Returns the cosine of the given angle in rad for α=60° ... COS(RADIANS(60)) ⇒ 0.5
SIN SIN(Angle[rad]) Returns the sine of the given angle in rad for α=30° ... SIN(RADIANS(30)) ⇒ 0.5
COT COT(Angle[rad]) Returns the cotangent of an angle in rad for α=45° ... COT(RADIANS(45)) ⇒ 1
TAN TAN(Angle[rad]) Returns the tangent of an angle in rad for α=45° ... TAN(RADIANS(45)) ⇒ 1
EXP EXP(Number) Returns e raised to the power of a given number EXP(1) ⇒ 2.71828
FLOOR FLOOR(Number;[Multiple=1];[Mode=0]) Rounds a number down, to the nearest integer multiple of significance

- if Number<0 and Mode<>0 ⇒ result is rounded to zero

- if Number<0 and Mode=0 ⇒ result is rounded away from zero

FLOOR(10.4;1;0) ⇒ 10

FLOOR(10.9;1;0) ⇒ 10

FLOOR(10.4;7;0) ⇒ 7

FLOOR(-10.4;1;0) ⇒ -11

FLOOR(-10.4;1;1) ⇒ -10

FLOOR(-10.4;7;0) ⇒ -14

FLOOR(-10.4;7;1) ⇒ -7

LN LN(Number) Returns the natural logarithm of a number LN(1)) ⇒ 0; LN(EXP(1)) ⇒ 1
LOG LOG(Number;[Base=10]) Returns the logarithm of a number to a specified base (10 if missing) LOG(1; 10) ⇒ 0; LOG(10; 10) ⇒ 1
LOG10 LOG10(Number) Returns the base-10 logarithm of a number LOG10(1) ⇒ 0; LOG10(10) ⇒ 1
MROUND MROUND(Number;Multiple) Returns a number rounded to the desired multiple

- rounds up, if the remainder after dividing the number by the multiple is ≥ to Multiple / 2.

MROUND(10.4;1) ⇒ 10

MROUND(10.4;2) ⇒ 10

MROUND(10;3) ⇒ 9 (Remainder = 1 < 1.5 (Multiple/2)

MROUND(11;3) ⇒ 12 (Remainder = 2 > 1.5 (Multiple/2)

PI PI() Returns the value of pi PI() ⇒ 3.141592653
POWER POWER(Base;Number) Returns the result of a number raised to a power POWER(2;4) ⇒ 16
SQR SQR(Number) Returns the result of a squared number SQR(5) ⇒ 25; SQR(-5) ⇒ 25
SQRT SQRT(Number) Returns a positive square root of a positive Number SQRT(36) ⇒ 6; SQRT(-36) ⇒ NAN
SUM SUM(Number1;Number2; ... ) Returns the sum of a series of numbers Inputs linked to data X[0;1;2;3;4;5;6]):

SUM({X⇓2:⇓5}) ... SUM(1; 2; 3; 4) ⇒ 10

SUM({X⇕}) ⇒ 21

SUMIF Returns the sum of all the values that meet a given criteria SUMIF({X_Coor⇕};">2";{Y_Coor⇕})
SUMIFS Returns the sum of all the values that meet the given criterias
DEG DEGREES(Angle [rad]) Converts radians into degrees DEGREES(PI()) ⇒ 180°; DEGREES(PI()/2) ⇒ 90°
RADIANS RADIANS(Number) Converts degrees to radians RADIANS(180) ⇒ π (3.141592653)
ROUND ROUND(Number;Places) Rounds a number to a specified number of digits

- negative Places round to the left of the decimal point

ROUND(58.563;3) ⇒ 58.563

ROUND(58.563;2) ⇒ 58.56

ROUND(58.563;1) ⇒ 58.6

ROUND(58.563;0) ⇒ 59

ROUND(58.563;-1) ⇒ 60

ROUND(58.563;-2) ⇒ 100

ROUNDUP ROUNDUP(Number;Places) Rounds a number up, toward zero ROUNDUP(58.563;3) ⇒ 58.564

ROUNDUP(58.563;2) ⇒ 58.57

ROUNDUP(58.563;1) ⇒ 58.6

ROUNDUP(58.563;0) ⇒ 59

ROUNDDOWN ROUNDDOWN(Number;Places) Rounds a number down, toward zero ROUNDDOWN(58.563;3) ⇒ 58.563

ROUNDDOWN(58.563;2) ⇒ 58.56

ROUNDDOWN(58.563;1) ⇒ 58.5

ROUNDDOWN(58.563;0) ⇒ 58

ROUNDDOWN(58.563;-1) ⇒ 50

ROUNDDOWN(58.563;-2) ⇒ 0

Text

Name Syntax, parameters Description Example
CONCAT CONCAT(Value1;Value2; ... ) Combines the text from multiple ranges and/or strings, but it doesn't provide the delimiter or IgnoreEmpty arguments

- Value1, Value2, ... can be as Text or Number

CONCAT(12;34;56) ⇒ 123456.000

CONCAT("12";"34";"56") ⇒ 123456.000

CONCAT(12;"34";56) ⇒ 123456.000

Input {GWTb} = 15

CONCAT({GWTb};" m") ⇒ "15 m"

LEFT LEFT(Text;[Count=1]) Returns the leftmost characters from a text value LEFT("qwert";3) ⇒ "qwe"

LEFT("qwert";1) ⇒ "q"

LEN LEN(Text) Returns the number of characters in a text string LEN("qwert") ⇒ 5

LEN("") ⇒ 0

RIGHT RIGHT(Text;[Count=1]) Returns the rightmost characters from a text value RIGHT("qwert";3) ⇒ "ert"

RIGHT("qwert";1) ⇒ "t"

SEARCH SEARCH(Find text;Within text;[Start=1]) Finds one text value within another (not case-sensitive) SEARCH("G";"Hello GEO!";1) ⇒ 7
TEXT Converts number to text

Statistical

Name Syntax, parameters Description Example
AVERAGE AVERAGE(Number1;Number2; ... ) Returns the average of its arguments AVERAGE(3;5;1) ⇒ 3

Inputs linked to data X[0;1;2;3;4;5;6]): AVERAGE({X⇓3:⇓5}) ... AVERAGE(2; 3; 4) ⇒ 3

AVERAGEIF Returns the average (arithmetic mean) of all the values that meet a given criteria
AVERAGEIFS Returns the average (arithmetic mean) of all the values that meet the given criterias
MAX MAX(Number1;Number2; ... ) Returns the maximum value in a list of arguments MAX(3;5;1) ⇒ 5

Inputs linked to data X[0;1;2;3;4;5;6]):

MAX({X⇓3:⇓5}) ... AVERAGE(2; 3; 4) ⇒ 3

MIN MIN(Number1;Number2; ... ) Returns the minimum value in a list of arguments MIN(3;5;1) ⇒ 1

Inputs linked to data X[0;1;2;3;4;5;6]):

MIN({X⇓3:⇓5}) ... AVERAGE(2; 3; 4) ⇒ 2

PERCENTIL PERCENTILE(Array;k) Returns the k-th percentile of values in a range Inputs linked to data X[1;2;3;4;5]):

PERCENTILE({X⇕};0.5) ⇒ 3

PERCENTILE.EXC PERCENTILE.EXC(Array;k) Returns the k-th percentile of values in a range, where k is in the range 0..1, exclusive Inputs linked to data X[1;2;3;4;5]):

PERCENTILE.INC({X⇕};1) ⇒ NAN

PERCENTILE.INC({X⇕};0.4) ⇒ 2.4

PERCENTILE.INC PERCENTILE.INC(Array;k) Returns the k-th percentile of values in a range Inputs linked to data X[1;2;3;4;5]):

PERCENTILE.INC({X⇕};1) ⇒ 5

STDEV STDEV(Number1;Number2; ... ) Estimates standard deviation based on a sample Inputs linked to data X[1;2;3;4;5]):

STDEV({X⇕}) ⇒ 1.581

STDEV.P STDEV.P(Number1;Number2; ... ) Calculates standard deviation based on the entire population Inputs linked to data X[1;2;3;4;5]):

STDEV.P({X⇕}) ⇒ 1.414

STDEV.S STDEV.S(Number1;Number2; ... ) Estimates standard deviation based on a sample Inputs linked to data X[1;2;3;4;5]):

STDEV.S({X⇕}) ⇒ 1.581

TRIMMEAN Returns the mean of the interior of a data set
MODE MODE(Number1;Number2; ... ) Returns the most common value in a data set Inputs linked to data X[1;2;3;4;5]):

MODE(({X⇕}) ⇒ NAN

MODE(({X⇕};3) ⇒ 3

MEDIAN MEDIAN(Number1;Number2; ... ) Returns the median of the given numbers MEDIAN(1;2;3;4;5;6;7) ⇒ 4

Lookup

Name Syntax, parameters Description Example
INDEX INDEX(Array;Index) Uses an index to choose a value from a reference or array Inputs linked to data Y[15;16;11;27;22]):

INDEX({Y⇓};2) ⇒ 16

INDEX({Y⇓};4) ⇒ 27

INDEX({Y⇓};9) ⇒ NAN

LINEARINTERPOLATION LINEARINTERPOLATION(X;Coordinates X;Coordinates Y) Calculates Y corresponding to X based upon linear interpolation of coordinates X, Y
Result of Linear Interpolation
MATCH MATCH(Value;Array;[ Type = 1 ]) Looks up values in a reference or array

- Type = 1 find max. value less or equal to Value

...values in Array must be sorted in ascending order

- Type = -1 find min. value greater or equal to Value

...values in Array must be sorted in descending order

- Type = 0 find first value equal to Value

...values in Array needn't to be sorted

Inputs linked to data Y[15;16;11;27;22]):

MATCH(11;{Y⇕}) ⇒ 3

MATCH(27;{Y⇕}) ⇒ 4

MATCH(999;{Y⇕}) ⇒ NAN

Matrix

Name Syntax, parameters Description Example
FILTERTABLE FILTERTABLE(Coordinates X;Coordinates Y) Filters repeating values and keeps the last one of them

Returns matrix with 2 columns:

Column 1: X - Filtered X

Column 2: Y - Filtered Y

Inputs linked to data

FILTERTABLE({X-value⇕};{Y-value⇕})

(2.000 ... ignored value, 2.000 ... saved value)

Row Col. 1 Col. 2
1 0.000 17.000
2 2.000 25.000
3 2.000 25.000
4 2.000 25.000
5 4.000 32.000
6 4.000 32.000
7 6.000 24.000
8 6.000 24.000
⇒⇒⇒⇒
Row Col. 1 Col. 2
1 0.000 17.000
2 2.000 25.000
3 4.000 32.000
4 6.000 24.000
Filtertable function
LINEARTREND LINEARTREND(Coordinates X;Coordinates Y) Returns the linear trend line

Returns matrix with 1 row and 2 columns:

Row Col. 1 Col. 2
1. k - Slope q - Offset
Inputs linked to data

X[1;2;3;4;5]; Y[15;16;11;27;22]

LINEARTREND({X⇕};{Y⇕})

NumRows = 1

Row Col. 1 Col. 2
1 2.5 10.7
Results of linear trend
LINEARTRENDANDPOINTS LINEARTRENDANDPOINTS(Coordinates X;Coordinates Y) Returns the linear trend line and its point representation

Returns matrix with 2 rows and 4 columns:

Row Col. 1 Col. 2 Col. 3 Col. 4
1. k - Slope q - Offset X1 Y1
2. NAN NAN X2 Y2
Inputs linked to data

X[1;2;3;4;5]; Y[15;16;11;27;22]

LINEARTREND({X⇕};{Y⇕})

NumRows = 2;

Row Col. 1 Col. 2 Col. 3 Col. 4
1. 2.5 10.7 0 10.7
2. NAN NAN 5 23.2
LINEARTRENDSC LINEARTRENDSC(Center X;Radius) Returns the linear trend line for semi-circles

Returns matrix with 1 row and 2 columns:

Row Col. 1 Col. 2
1. k - Slope q - Offset
Inputs linked to data

X[4;8;15]; R[3;5;8]

LINEARTRENDSC({X⇕};{R⇕})

NumRows = 1

Row Col. 1 Col. 2
1 0.506 1.42
Results of linear trend and points
LINEARTRENDSCANDPOINTS LINEARTRENDSCANDPOINTS(Center X;Radius) Returns the linear trend line for semi-circles and its point representation

Returns matrix with 2 rows and 4 columns:

Row Col. 1 Col. 2 Col. 3 Col. 4
1. k - Slope q - Offset X1 Y1
2. NAN NAN X2 Y2
Inputs linked to data

X[4;8;15]; R[3;5;8]

LINEARTRENDSCANDPOINTS({X⇕};{R⇕})

NumRows = 2

Row Col. 1 Col. 2 Col. 3 Col. 4
1. 0.506 1.42 0 1.42
2. NAN NAN 15 9.01
LINEARTRENDTOPOINTS LINEARTRENDTOPOINTS(Slope;Offset) Returns points of the linear trend line

Returns matrix with 2 rows and 2 columns:

Row Col. 1 Col. 2
1. X1 Y1
2. X2 Y2
LINEARTRENDTOPOINTS(0,5;3)

NumRows = 2

Row Col. 1 Col. 2
1. -1000 -497
2. 1000 503
Results of linear trend
SEMICIRCLETOPOINTS SEMICIRCLETOPOINTS(Center X;Radius;[Points count 10]) Returns points of the semi-circle

Returns matrix with 2 rows and [Points count] columns:

Row Col. 1 Col. 2
1. X1 Y1
2. X2 Y2
... ... ...
... ... ...
[Points count] Xn Yn
SEMICIRCLETOPOINTS(0,5;3;10)

NumRows = 10

Row Col. 1

X

Col. 2

Y

1. -2,5 0
2. -2,31908 1,02606
3. -1,79813 1,928363
4. -1 2,598076
5. -0,02094 2,954423
6. 1,020945 2,954423
7. 2 2,598076
8. 2,798133 1,928363
9. 3,319078 1,02606
10. 3,5 3,67E-16
Results of semi-circle to points
POLYNOMIALTREND POLYNOMIALTREND(Coordinates X;Coordinates Y;[Order=2];[Force origin=False]) Returns the polynomial trend curve

Returns matrix with 1 columns:

Column 1 coefficients:

c - Coefficients c0 + c1*x + c2*x2 + ...

POLYNOMIALTRENDANDPOINTS({X-Input⇕};{Y-Input⇕};2;9)

Order = 2

Points count = 9

Coeff.: c0 = 8,238; c1 = 13.203; c2 = -1.32

Approx. formula: y = -1,32x2 + 13,203x + 8,238

Results:

Row Col. 1

c

Col. 2

X

Col. 3

Y

1. 8.238 1 20.121
2. 13.203 2 29.364
3. -1.32 3 35.965
4. 4 39.926
5. 5 41.247
6. 6 39.926
7. 7 35.965
8. 8 29.364
9. 9 20.121
Results of PolynomialPoints approximation
POLYNOMIALTRENDANDPOINTS POLYNOMIALTRENDANDPOINTS(Coordinates X;Coordinates Y;[Order=2 ];[Points count=10];[Force origin=False]) Returns the polynomial trend curve and its point representation

Returns matrix with 3 columns:

Column 1 coefficients:

c - Coefficients c0 + c1*x + c2*x2 + ...

Column 2: X - Coordinates X

Column 3: Y - Coordinates Y

Force origin: True ... if you want include point (0,0) in Coordinates X and Y

SPLINE SPLINE(Coordinates X;Coordinates Y;[Points count=20]) Returns points of the spline running through given points

Returns matrix with 2 columns:

Column 1: X - Coordinates X

Column 2: Y - Coordinates Y

Coordinates X and Y are part of the Spline curve

Inputs:

Row X Y
1. 5 5
2. 10 7
3. 15 3
4. 20 6
SPLINE({X-Input⇕};{Y-Input⇕};[Num of Points])

Num of Points = 8

Results:

Row Col. 1

X

Col. 2

Y

1. 5,000 5,000
2. 5,465 5,313
3. 6,016 5,668
4. 6,633 6,035
5. 7,296 6,385
6. ... ...
Result of Spline function

Informative

Name Syntax, parameters Description Example
ISIMPERIAL ISIMPERIAL() Returns TRUE if project is calculated in imperial units If the project is in imperial [ft, in, ...] units:

ISIMPERIAL() ⇒ TRUE; ⇒ 1

ISMETRIC() ⇒ FALSE; ⇒ 0

ISMETRIC ISMETRIC() Returns TRUE if project is calculated in metric units If the project is in metric [m, mm, ...] units:

ISMETRIC() ⇒ TRUE; ⇒ 1

ISIMPERIAL() ⇒ FALSE; ⇒ 0

ISNUMBER ISNUMBER() Returns TRUE if argument is number ISNUMBER(15) ⇒ TRUE; ⇒ 1

ISNUMBER(15e2) ⇒ TRUE; ⇒ 1

ISNUMBER(1/4) ⇒ TRUE; ⇒ 1

ISNUMBER(aaa) ⇒ FALSE; ⇒ 0

ISTEXT ISTEXT() Returns TRUE if argument is text ISTEXT(123)

ISTEXT("123")

ISTEXT(abc)

ISTEXT("abc")

LANG LANG() LANG([ Application = False ]) If the application is in English and output language is Spanish:

LANG(FALSE()) ⇒ EN; LANG(0) ⇒ EN

LANG(TRUE()) ⇒ ES; LANG(1) ⇒ ES

Geotechnic

Name Syntax, parameters Description Example
FINESOILCLASSIFICATION FINESOILCLASSIFICATION(Plasticity Index [-];Moisture [-];

Method 0 = EN ISO 14688-2 (2018); 1 = EN ISO 14688-2 (2013);

2 = ČSN 73 6133)

For classification we can use these standards for plasticity diagram:
Possible standards for plasticity diagram
 Returns the classification of fine soil according to selected method

For inputs use number from interval (0;1)

FINESOILCLASSIFICATION(0.137;0.333;0) ⇒ ClL

or percetage

FINESOILCLASSIFICATION(13.7/100;33.3/100;0) ⇒ ClL

or inputs linked to data according to unit

FINESOILCLASSIFICATION({I\_p\-⇓ [-]}/100;{LiqLimit⇓ [-]}/100;0)

or inputs linked to data with unit setup

FINESOILCLASSIFICATION({I\_p\-⇓ [-]};{LiqLimit⇓ [-]};0)
Unit setup for input
 FINESOILCLASSIFICATION(0.137;0.333;0) ⇒ ClL
Fine Soil Classification EN ISO 14-688-2 (2018)
FINESOILCLASSIFICATION(0.137;0.333;1) ⇒ ClL
Fine Soil Classification EN ISO 14-688-2 (2013)
SOILCLASSIFICATION SOILCLASSIFICATION(Size [mm];Fall [-];Method 0 = EN ISO 14688-2 (2018)) Returns the classification of soil according to selected method
Číslo Průměr zrn Propad
[mm] [%]
1 32,000 100,00
2 16,000 100,00
3 8,000 100,00
4 4,000 99,76
5 2,000 98,76
6 1,000 97,52
7 0,500 95,52
8 0,200 91,52
9 0,100 85,02
10 0,063 79,02
11 0,057 76,40
12 0,042 70,70
13 0,030 67,50
14 0,019 65,00
15 0,011 60,50
16 0,008 57,40
17 0,006 55,00
18 0,003 51,20
19 0,001 46,10

Date and Time

Name Syntax, parameters Description Example
DATE DATE(Year;Month;Day) Returns the serial number of a particular date DATE(1899;12;30) ⇒ 0

DATE(2024;10;31) ⇒ 45596

Inputs linked to data

{MyYear}=2024;{MyMonth}=10;{MyDay}=31

DATE({MyYear};{MyMonth};{MyDay}) ⇒ 45596

NOW NOW() Returns the serial number of the current date and time For date and time 20.12.2024 13:48:04 is

NOW() ⇒ 45646.5750510648

For date and time 01.01.1900 00:00:00 is

NOW() ⇒ 1.00

TIME TIME(Hour;Minute;Second) Returns the serial number of a particular time TIME(0;0;0) ⇒ 0

TIME(18;15;20) ⇒ 0.760648

Inputs linked to data

{MyHour}=10[hour];{MyMinute}=15[min.];{MySecond}=25[sec.]

TIME({MyHour};{MyMinute};{MySecond}) ⇒ 0.42737

TODAY TODAY() Returns the serial number of the current date For date 20:12:2024

TODAY() ⇒ 45646

For date 1.1.1900

TODAY() ⇒ 1

Retrieved from "https://wiki.fine.cz/index.php?title=Formula_Specification_in_Templates&oldid=623"